Ok, so the cooling system is all in place now – no leaks. I’ve got the pump hooked up to run whenever the key is on. Makes a small gurgle noise, so there is still some air in the system.
Hints: when installing new hoses, stretch the new hose where it will go over the barbs – makes life a LOT easier for the installer. Also, make sure the fittings are snug – otherwise, while the hose might be water-tight, the fitting could leak.
I was hoping to bring the car off the jackstands this weekend, but with the rain coming through, it is not very likely. Really don’t want to mix rain and electrical parts – especially since I haven’t re-installed the rear trunk lid.
I’ll post a picture of the radiators later.
